Why Choose Aluminum for transformer?
Economic ,means less cost for better achievements
Conductivity of Copper is better,but Aluminum’s is as double as copper at the same price.
Aluminum is more flexible that means it easier to wind and place in winding process.
Why Choose us?
We Luoyang Xinzhaohe Aluminum Co.,Ltd have been more than 11 years experience of aluminum foil ,aluminum strip for transformer, We understand deeply what our client needs(No Burrs
Round Edge,High Conductivity),strictly in accordance with international standards such as ASTM,EN_AB,JIS,GB for the production of various grades of aluminum products.
1060-O, 1050, 1050 A, 1070, 1070A, 1350 Aluminum Strips
used in dry-type transformer are made of high-quality pure aluminium. They have the characteristics of high conductivity, soft quality, smooth surface and no burr. They are ideal materials for dry-type transformer production. They are the key raw materials for transformer winding. They require a lot of technical indexes such as conductivity of 1060-O, 1050, 1050 A, 1070, 1070A, 1350 Aluminum foil rolls, burr crimping, side bending and surface quality. They can make dry-type transformer in application.
Chemical composition of aluminum Strips for transformer winding:
Aluminum Al: 99.60, silicon Si: 0.25, copper Cu: 0.05, magnesium Mg: 0.03, zinc Zn: 0.05, manganese Mn: 0.03, titanium Ti: 0.03, vanadium V: 0.05, iron Fe: 0.350, note: single: 0.03.
Special aluminum foil rolls for transformer winding:
Material: 1060-O, 1050, 1050 A, 1070, 1070A, 1350
Usage: Aluminum foil and transformer strip for dry-type transformer
Thickness: 0.2mm – 3.0mm, width: 20mm – 1650mm.
Description: Smooth surface without scratches. The edge can be chamfered (round corner, round edge), without burrs, which is superior to the national standard.
Packaging: wooden pallet with inner diameter of 300 mm or 500 mm. Packing with moistureproof paper and intermediate paper sleeve
Standard production:ASTM-B-209M,BS EN 485-2,BS EN 573-3,GB/T3880-2008
We have a complete production, processing and quality control system.
Especially a (1+4) hot rolling production line with 30,000 tons annual output.
3 continuous casting-rolling production lines.
2 sets cold rolling machines.
2 sets foil rolling machines.
2 sets continuous rotary coating machines.
2 sets mirror surface polishing machines.
2 sets laminating machines.
3 sets embossing machines and other processing machines.
1. Standard seaworthy exporting carton.
2. Wooden pallets on the bottom.
3. Waterproof plastic package.
4. Packing paper cover.
5. Or as required.
The inner size of container is below:
20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM,23MTS
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM,27MTS
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM,27MTS